1500m Ethernet Distance Extender 45Mbps High Transmissior Speed Easy Construct
-
High Light
ethernet wire extender
,ethernet network extender
-
TransissionHigh Speed 45Mbps UDP
-
Size100X74X26mm
-
ExtenderEthernet On Cable
-
MediumCopper
-
Place of OriginCHINA
-
Brand NameMESTECHS
-
Model NumberMPL80-H-4
-
Minimum Order Quantity2
-
PriceNegotiable
-
Packaging DetailsCommon Package
-
Delivery Time35 work days
-
Payment TermsT/T
-
Supply Ability1000 pieces /Month
1500m Ethernet Distance Extender 45Mbps High Transmissior Speed Easy Construct
Ethernet Cable Extender MPL80-H-4 long distance 1500m high transmissior speed 45Mbps
Product Profile
- MPL80-H-4 network extender is a high-speed network transmission equipment. Based on OFDM modulation and demodulation technology, it can be transmitted by any two core wires, such as twisted pair,coaxial cable, power line, etc. The maximum transmission distance can reach 1600 meters (1 mm diameter armored power line), and the maximum physical layer rate can reach 240 Mbps.
- The Ethernet signal and the RS485 signal can be transmitted on a cable at the same time; Power supply, signal common cable transmission, easy construct, cost savings.
- Support point to point and point to multi-point data transmission.Based on ITU-T G.cmsr standard multi-hop technology, can support the maximum 10-level relay, relay delay is less than 10 ms, theoretical maximum distance is 10KM, to meet the needs of long-distance communication.
- The power consumption of the whole machine is less than 2W
- Compliance with EU EN-50561 Standard and Specification
Appearance and Interface
Transmission medium:
MPL80-H-4 can transmit data on copper lines such as coaxial cables,telephone lines, twisted pair lines, shoulder lines, armored cables, power lines, etc..
| Type of cable | Transmission distance |
| Coaxial cable |
2000m@1mm diameter |
| Armoured cable |
1600m@1mm diameter |
| Twisted pair |
1500m@ 0.5mm diameter 1000m@0.4mm diameter |
| Power line |
500m |
| Shoulder line |
800m@1mm diameter |
Typical application:
Industrial video surveillance
Elevator swipe control management system
Industrial control
MPL80-H-4 can support point-to-point communication and can also support point to multi-point communication of bus structures.
Point to point
Point to point relay mode
Point to multi-point
MPL80-H-4 Wiring diagram
Electrical Characteristics:
| Category | Item | Parameter |
| Power | input | DC12V or DC18~72V(four-wire) |
| Transmission | power dissipation | ≤2W |
| Transmission Medium | Telephone lines, twisted pair lines, shoulder lines, armored cables, power lines, etc.. | |
| Communication distance | up to 1600m | |
| Bandwidth | up to 45Mbps | |
| Multicast | Support for IGMP multicast protocol | |
| Ethernet | 10M, 100M Adaptive | |
|
Connector |
Power in(VIN=12VDC) | Junction seat(Distance 3.81 mm) |
| Ethernet (data) | RJ45(1,2 and 3,6) | |
| Network signal input and output | Junction seat(Distance 3.81 mm) | |
|
Indicator Light |
PWR | Power indicator. Turn on the power. |
| LNK | Signal connection light, when the main slave device signal connection, when the main slave device is not connected | |
| RJ45 yellow and green light | Network communication indicator light, flashing when communicating | |
|
Appearance |
Size | 100mm(not include master dialing switch) X 74mm(not include Hanging ears) X 26mm |
| Color | gray | |
| Weight | 160 g | |
|
Environmental Requirements |
Operating temperature | -40℃-70℃ |
| Humidity | 0-95% | |
| Storage temperature | -40℃-85℃ |
Order Information
P/N: MPL80-H-4
Our services cover all industries and reach all parts of the world.