MFE20 2-port 10/100M industrial Ethernet Media Converter DIN Rail Mounting Installation AC 220V input
MFE20 is an industrial 100M fiber transceiver, the upload port is 100 megabytes single-mode single-fiber FC fiber interface, and the download port is 100 megabytes Ethernet port, which can realize the Ethernet electrical/optical signal mutual conversion, and carry out long-distance data and video signal transmission through optical fiber.
MFE20 upload uses wavelength division multiplexing technology, sending a wavelength of 1550nm and receiving a wavelength of 1310nm, simultaneously transmitting and sending data through a single-mode optical fiber, with a maximum transmission distance of 20km.
MFE20 adopts industrial design, supporting AC/220V power supply, wide operating temperature range, good reliability, outstanding quality, superior performance, Availible for residential areas, enterprises, roads, factories, mines, buildings and other monitoring scenarios. Recommend to use optical fiber transmission optical switch MFE200/400/600.
Feature
Specification
Supported Standards |
IEEE 802.3 IEEE802.3i IEEE 802.3u IEEE 802.3ab,IEEE 802.3z,IEEE 802.3x |
Port | One 100Mbps FC optical fiber interface |
One 10Mbps/100Mbps adaptive port (RJ45) | |
AC / 220V power input (European type terminal) | |
Transmission wavelength | TX:1550nm |
RX:1310nm | |
Cable | UTP and STP |
Optical fiber | 9/125um single-mode fiber |
LED | Optical and electrical port Link/Act, PWR |
Power | 220V/0.012A |
Size | 94.5mm*73mm*27mm |
Operating temperature | -40℃~70℃ |
Operating humidity | 10% ~ 90%RH non-condensing |
Storage temperature | -40~85℃ |
Storage Humidity | 5% ~ 90%RH non-condensing |
Average transmitted power | -14 ~ 7dBm |
Receive sensitivity | -32dBm |
Data transfer rate per port | 100 MBPS full-duplex |
Order Information
Product Description Order Code
2-port 10/100M industrial Ethernet Media Converter MFE20