Dual Band Wi-Fi AP Gigabit Embedded Ethernet Modules Wireless Router
Embedded MIPS1004Kc (880 MHz, Dual-Core)
- 32 KB I-Cache and 32 KB D-Cache per core
- 256 KB L2 Cache (shared by Dual-Core
- SMP capable
- Single processor operation configurable
- 5 ports with full-line rate
- 5-port 10/100/1000Mbps MDI transceivers
One RGMII/MII interface
16-bit DDR2/3 up to 256/512 Mbytes
SPI(2 chip select), NAND Flash(SLC), SDXC,eMMC(4 bits)
USB3 x 1+ USB2 x 1 or USB2 x 2 (all host)
PCIe host x 3
I2C, UART Lite x 3, JTAG, MDC, MDIO, GPIO
VoIP support (I2S, PCM)
Audio interface (SPDIF-Tx, I2S, PCM)
Deliver the superb Samba performance via USB2.0/USB 3.0/SD-XC
HW storage accelerator
- 2Gbps wired speed
- L2 bridge
- IPv4 routing, NAT, NAPT
- IPv6 routing, DS-Lite, 6RD, 6to4
- 16 hardware queues to guarantee the min/max bandwidth of each flow.
- Seamlessly co-work with HW NAT engine.
- 2Gbps wired speed.
Deliver 400~500 Mbps IPSec throughput
-Intelligent Clock Scaling (exclusive)
-DDR2/3: ODT off, Self-refresh mode
Firmware: Linux 2.6 SDK, OpenWRT
RGMII iNIC Driver: Linux 2.4/2.6
|Memory(RAM)||DDR3-SDRAMPC-160016-bit,128MB/256MB/512MB storage (optional)|
|storage(FLASH)||SPINORFLASH,16MB/32MB/64MB storage (optional)|
|Cable network standard||IEEE802.3,IEEE802.3u,Auto MDI/MDIX|
|WIFI rate||2.4G WIFI up to 300Mbps,5G WIFI up to 866Mbps|
|WIFI interface type||I-PEX(2.0mm)|
|2.4G WIFI transmitting power||802.11b18±2dBm,802.11g18dBm±2dBm,802.11n17dBm±2dBm|
|5G WIFI transmitting power||802.11a16±2dBm,802.11n16±2dBm,802.11ac15dBm±2dBm|
|2.4G WIFI receive sensitivity||802.11b≦-76dBm,802.11g≦-65dBm,802.11n≦-61dBm|
|5G WIFI receive sensitivity||802.11a≦-65dBm,802.11n≦-61dBm,802.11ac≦-59dBm|
|Module interface||DDR3SO-DIMM(baseboard with DDR3SO-DIMMSocket)|
|Input voltage||5V-15V DC voltage input(DC5V-15V)|
|POE power(PSU)||Available(Relevant circuits are required on the baseplate)|
Q: Are you a factory or a trading company?
A: We are the manufacturer of Industrial PoE Switch,Gigabit Ethernet Core Module.......
Q: Can you do OEM/ODM?
A: Yes, both OEM and ODM services are acceptable and we can also print your logo and make your packaging according to your requirements.
Q: How do you ship the goods?
A: The products will be sent to you by optional shipping service, such express, air cargo, sea transportation.
Q: How is your product quality?
A: We always put emphasis on the quality of our product. Our product are 100% tested and inspected before shipment. We assure 1 year warranty for all our products.