MIS8104N 2.5G Ethernet Plug-In Switch Module
4x 2.5G Ethernet with 10G SFP+ Switch Module Small-Scale 2.5G Ethernet Switch
With the increasing demand for 2.5G access, 2.5G switches began to gradually replace traditional gigabit switches. Our MIS8104N is a small scale 2.5G switch, cost effective with high integration and low power consumption, probably be one of the best choices for small scale 2.5G switch in the same type of commercial application.
MIS8104N, a standalone 4x 2.5G with SFP+ Plug-In switch, is referring from the Diamond EPS-12000-CM, a similar product in the market. We keep use the same connector for Ethernet RJ45, can simply plug-in the existing cable and provide 2.5G Ethernet instead of traditional 1G Etherent.
Our MIS8104N power through wide voltage input range from +6V ~ +36V DC.
Feature Highlights
Port capacity
MIS8104N 2.5G switch design uses non-European and American company Realtek switch chip. The Realtek 2.5G switch chip supports quad-port 2.5G Ethernet PHY Transceiver and 10G Serdes. MIS8104N can be expanded in stacks with its stacking capacity.
Cost-effective Design
MIS8104N is low-power, high-performance and highly integrated 2.5G ports and 10G SFP+ switch. The embedded packet storage SRAM in the chip features superior memory management technology to efficiently utilize memory space. The non-blocking switch architecture, with internal integratiion of high capacity cache, link aggregation function enhances link redundancy and increases bandwidth linearly, all ports can be forwarded at high speed and maintain high switching capacity. Offering wire-speed performance for 2.5G platforms, the MIS8104N switch provides a cost-effective solution for small scale 2.5G Ethernet switches.
Multi-speed Intelligent Switching Function
MIS8104N uses state-of-the-art DSP technology and an Analog Front End (AFE) to enable high-speed data transmission and reception over UTP cable. The embeded 2.5G Ethernet PHY Transceiver that complies with 10Base-Te, 100Base-TX, 1000Base-T and 2.5GBase-T, and is fully compatible with IEEE 802.3 standard. This adaptive ability allows plug and play connection to the existing Cat. 5e cable network and upgrade to 2.5G fast network easily. Its high-performance switching controller, integrated high-capacity cache, can ensure that all ports can achieve high-speed forwarding and high switching capacity, adapt to more unexpected situations.
Wide Voltage Input Range Design
MIS8104N is power through wide range of input +6V to 36V DC. The input voltage to be DC/DC converted to +5.5V@3.5A as transients for inter-board connection, then to be converted to +3.3V and 0.95V independently.
Modulation Design
We are engineering based company, have the technical and engineering abilities to develop a new switching product in both hardware and software aspect. We can also base on customer requirements, specific industries or application scenarios, to design the unique specifications and requirements of our customers’ own products.
Hardware Specifications
Item | Details |
Ethernet Port | 4x 10M/100M/1G/2.5G Base-T RJ45 |
Optical Port | 1x 10G Base-R SFP+ |
Power Input | DC 6 ~ 36V |
Power Consumption | < 6W |
PCBA Dimension | 84mm x 55mm x 18mm |
Standard | IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3ab,IEEE802.3az, IEEE802.3bz, IEEE802.1p, IEEE802.1Q, IEEE802.1x |
Storage Conditions |
Storage Temperature : -10° ~ 85°C Storage Humidity : 5% ~ 90% |
Operating Conditions |
Operating Temperature : 0° ~ 70°C Operating Humidity : 10% ~ 90% |
Order Information
Product Description | Order Code |
Module | |
4x 2.5G Switch Module | MIQ8104N |
8x 2.5G Expansion Base Board | MIQ8008B |
Model | |
4x 2.5G with SFP+ Plug-In Switch | MIS8104N |
8x 2.5G Plug-In Switch | MIS8008N |
12x 2.5G with SFP+ Plug-In Switch | MIS8112N |
Accessary | |
4x 2.5GE RJ45 Extension Cable (2x16 32-pin Female House with 4x RJ45) | GM-000236 |
Power Cable (2x2 Female House) | GM-000234 |