Ethernet Network Extender MPL80-H-2 Ethernet on AC or DC Powerline long range extender 1500m high speed 45Mbps
- MPL80-H-2 network extender is a high-speed cable network transmission equipment. Based on OFDM modulation and demodulation technology, it can be transmitted by any AC or DC power line. The maximum transmission distance can reach 1500 meters (1 mm diameter Coaxial cable), and the maximum physical layer rate can reach 240 Mbps.
- Electric power and data are transmitted on the same cable.
- Power supply, signal common cable transmission, easy construct, cost savings;
- Support point to point and point to multi-point data transmission.
- The power consumption of the whole machine is less than 2W.
- Compliance with EU EN-50561 Standard and Specification.
Industrial video surveillance
Elevator swipe control management system
Ethernet Extender on Power line
MPL80-F-2 can support point-to-point communication and can also support point to multi-point communication of bus structures.
Point to Point
Point to Point Relay mode
Point to Multi-point mode
MPL80-H-2 Wiring diagram
||up to 1600m
||up to 45Mbps UDP
||Support for IGMP multicast protocol
||10M, 100M Adaptive
|Power in/ WAN (Network signal input and output)
||Junction seat(Distance 3.81 mm)
||RJ45(1,2 and 3,6)
||Power indicator. Turn on the power.
||Signal connection light, when the main slave device signal connection, when the main slave device is not connected
|RJ45 yellow and green light
||Network communication indicator light, flashing when communicating
||100mm(not include master dialing switch) X 74mm(not include Hanging ears) X 26mm