SHP300-H Long range power line cummunication relay mode ethernet cable extender HD-PLC
SHP300 is an industrial power line carrier communication device, which adopts the technology of HD-PLC and is oriented to the industry application. SHP300 uses OFDM modulation technology, the modulation frequency band is 2-28mhz, SHP300-H can set modulation frequency to extend communication distance. The maximum transmission rate of physical layer can reach 240Mbps, the embedded automatic relay routing protocol, the maximum support for 10 level relay, can transmit high-definition video, audio signal and all kinds of data.
SHP300-H provides a set of Ethernet interfaces and a 12V DC output (output power up to 5W). Users can easily transfer data on the power line (AC or DC power line) through the module reliably. It can be widely used in power equipment data acquisition, solar photovoltaic communication, charging pile data acquisition and monitoring, building visual intercom, industrial data acquisition and control, railway switch machine gap monitoring, etc toll station monitoring, traffic light monitoring and other occasions where power line is needed for data communication.
SHP300 HD-PLC has the following advantages over Homeplug AV technology:
|Power line interface||Modulation Mode||Wavelet-OFDM|
|Physical layer / effective transmission rate||Up to 240Mbps/92Mbps|
|Error Correction Method||Convolutional code and Solomon code|
|Performance Parameter||working Temperature||-40℃~+70℃|
|Size||68 X 46 X 23.5 mm|
|Power Supply||85~305VAC or 120~432VDC|
|LAN Interface||Standard||IEEE 802.3/IEEE 802.3u|
Module interface Introduction (top view)
The input end of SHP300 power supply is a two-core cable. The DC 12V output and network cable use a six core cable. SHP300 also has two LED indicators, one green and one yellow. The green light is always on, which means the normal connection of PLC. The yellow light is the network port indicator.
Product Description Order Code
Ethernet Cable Extender SHP300-H